Precautions in using Olympus microscope

Olympus microscope can be divided into polarizing microscope, metallographic microscope, fluorescence microscope, biological microscope, stereoscopic microscope, phase contrast microscope, inverted microscope and so on according to different functions. When using, it is necessary to pay attention to the use mode and maintenance at the same time.

matters needing attention:

1. Do not move the microscope frequently. Shake the microscope and keep the microscope room dry and clean;

2. Do not replace the original power cord at will;

3. Don't dismantle the objective lens at will;

4. When there is dust on the surface of eyepiece, objective lens, condenser lens and other optical components, it should be blown with blowing balloon first, and then wiped with cotton swab dipped in cleaning solution, the method is spiral wiping from the inside to the outside;

5. It is recommended to use 70% ether and 30% anhydrous alcohol as cleaning solution;

6. Adjust the voltage of the mirror body to the minimum when it is shut down after use, so as to prevent the lamp from burning due to high voltage when it is restarted;

7. Make sure to replace the lamp after the lamp box cools down;

8. Don't switch on and off the mercury lamp frequently; In order to prolong the service life of mercury lamp, please do not turn off the power within 15 minutes after turning on the power, and the interval between the second restart should be at least 10 minutes; It is recommended that the mercury lamp should be used for 1-2 hours each time (the service life is about 200 hours);

9. Do not wipe the fluorescent excitation block at will;